1、静态聚合的配置

1）配置S1

 # 创建二层聚合接口1
 [S1] interface bridge-aggregation 1
 [S1-Bridge-Aggregation1] quit
 # 分别将端口GigabitEthernet1/0/1和GigabitEthernet1/0/2加入到聚合组1中。
 [S1] interface gigabitethernet 1/0/1
 [S1-GigabitEthernet1/0/1] port link-aggregation group 1
 [S1-GigabitEthernet1/0/1] quit
 [S1] interface gigabitethernet 1/0/2
 [S1-GigabitEthernet1/0/2] port link-aggregation group 1
 [S1-GigabitEthernet1/0/2] quit

2)配置S2

 #创建二层聚合接口1
 [S2] interface bridge-aggregation 1
 [S2-Bridge-Aggregation1] quit
 # 分别将端口GigabitEthernet1/0/1和GigabitEthernet1/0/2加入到聚合组1中。
 [S2] interface gigabitethernet 1/0/1
 [S2-GigabitEthernet1/0/1] port link-aggregation group 1
 [S2-GigabitEthernet1/0/1] quit
 [S2] interface gigabitethernet 1/0/2
 [S2-GigabitEthernet1/0/2] port link-aggregation group 1
 [S2-GigabitEthernet1/0/2] quit

3)验证配置

 #查看S1上所有聚合组的详细信息 
 dispaly link-aggregaton verbose

2、动态聚合的配置

 interface bridge-aggregation 1
 link-aggregation mode dynamic
 quit